Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as aluminum or timber.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and improve the efficiency of energy.
- Broken Glass
If the glass in your window is broken it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.
Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is difficult to remove and www.repairmywindowsanddoors.co.uk replace the panes that were previously in use. In this instance, you will need to source some plastic spacers to help the new pane to fit correctly into the frame of the window.
Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.
It's a great idea tape the gap once the glass is removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the window and the door is large, you might need to consider a security screen that also includes a window. This will give you the best of both.
- Sagging
uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.
To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and check for fit. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.
If you can't reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.
uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.
- Water Leaks
It is important to take action if awake each day to find mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.
This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and reduce its energy efficiency.
Make sure that the drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.
Mold spots and rotten sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.
It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
- Faulty Hinges
If your uPVC windows are brittle to open, or loose and open with a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Like any mechanical component, hinges can be damaged over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help you hold the frame.
Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
Faulty window hinges could be caused by improperly opening the window a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be happy to give you suggestions.
It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.
- Draughts
Draughts in Upvc windows can be caused by a few different factors. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear between the sash and the frame. If they are beyond repair, it might be required to realign them. The interlock, which is located on the hinge side of the window, may also be misaligned, and again it may be possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.
These seals can wear down or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease draughts.
One of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!
With a little maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than repair them. If you have any problems with your window made of upvc you should consult an expert as soon as you can.